FOX 3.2 Factory Race + Camburg SLAPPER Ultimate Suspension System 

Take your 4th-generation Toyota Tacoma to the next level with a no-compromise suspension package built around FOX 3.2 Factory Race Series shocks, Camburg KINETIK billet suspension components, Camburg Performance SLAPPER lower control arms, and ICON rear suspension components.

This Ultimate system goes far beyond a basic shock-and-spring lift. It upgrades the Tacoma's front damping, control arms, rear damping, rear links, track-bar geometry, and rear spring capacity as one comprehensive package designed for serious trail use, high-speed off-road driving, overlanding, and premium street performance.

At the heart of the system are FOX 3.2 Factory Race Series Internal Bypass shocks. FOX's large-body Factory Race platform provides increased oil capacity and heat management with position-sensitive internal bypass damping for substantially more control as terrain and suspension speeds increase.

What's Included

Every configuration includes:

• FOX 3.2 Factory Race Series front coilovers
• FOX 3.2 Factory Race Series rear shocks
• Camburg KINETIK V2 billet upper control arms
• Camburg Performance SLAPPER lower control arms
• Camburg KINETIK billet rear lower trailing arms
• ICON billet adjustable rear upper links
• ICON billet adjustable rear track bar
• ICON rear coil springs selected for your vehicle setup
• ICON front differential drop kit on 4WD configurations only

Choose Your Suspension Setup

Daily + Trail – Standard Weight

Choose Daily + Trail for Tacomas that remain near normal operating weight and see a combination of daily driving, weekend trails, desert use, and recreational off-roading.

The included ICON triple-rate rear coil springs provide compliant initial suspension movement while increasing support deeper into the suspension travel.

This is the recommended configuration for trucks that do not carry substantial permanent rear weight.

Overland – Constant Added Weight

Choose Overland for Tacomas that regularly carry substantial permanent weight from equipment such as:

• Bed racks
• Rooftop tents
• Camper systems
• Drawer/storage systems
• Recovery equipment
• Tools
• Spare fuel and water
• Other permanently installed overland equipment

The ICON Dual Rate Overland rear springs are designed around Tacomas carrying approximately 600 lb of additional constant rear weight.

Do not select the Overland configuration simply because you occasionally carry cargo. If your Tacoma normally operates near standard weight, select Daily + Trail – Standard Weight.

Choose Your Camburg Color

Customize the billet Camburg suspension components to match your build:

Gray • Red • Gold • Blue

Your selected color applies to both the Camburg KINETIK V2 upper control arms and Camburg KINETIK rear lower trailing arms, creating a coordinated front-to-rear suspension package.

Choose Your Drivetrain

2WD

The 2WD configuration includes the complete suspension system without the front differential drop.

4WD

The 4WD configuration adds an ICON front differential drop kit to help improve front CV-joint operating angles as suspension height and available droop increase.

Make sure you select the drivetrain that matches your Tacoma when ordering.

Camburg Performance SLAPPER Front Suspension

The Camburg Performance SLAPPER lower control arms take this package substantially beyond a conventional coilover-and-UCA lift kit.

Combined with the KINETIK V2 billet upper control arms, major factory front suspension components are replaced with purpose-built Camburg hardware for customers looking for a much more comprehensive front suspension system.

Complete Rear Suspension Upgrade

The rear suspension receives much more than upgraded shocks.

In addition to FOX Factory Race rear shocks and application-specific ICON rear coil springs, the system includes Camburg KINETIK billet rear lower trailing arms, ICON billet rear upper links, and an ICON adjustable rear track bar.

This upgrades the major locating components of the Tacoma's coil-spring rear suspension while adding adjustability for properly setting up a modified truck.

Fitment

Designed for compatible 2024–Current Toyota Tacoma 2WD and 4WD models equipped with coil-spring rear suspension.

Does NOT fit Tacoma models equipped with rear leaf springs.

Professional installation and a complete alignment are strongly recommended.

Final ride height and suspension setup can vary depending on vehicle trim, vehicle weight, permanently installed accessories, wheel and tire combination, and installation settings.

Built for the Customer Who Wants More Than a Lift Kit

This isn't a basic leveling kit with upgraded shocks. It's a front-to-rear premium suspension system combining FOX Factory Race damping with Camburg KINETIK and SLAPPER hardware and ICON rear suspension components.

Select your Suspension Setup, Camburg Color, and Drivetrain to configure the system for how your Tacoma is actually built and used.