ICON - Stage 1 EXP Suspension Lift Kit - Tundra 2022-Curernt

ICON Stage 1 EXP Suspension System

Give your third-generation Toyota Tundra a more controlled, confident ride without replacing the factory front coil springs. This Stage 1 system combines fully serviceable 2.5-inch EXP front shock technology with vehicle-specific rear dampers, creating a balanced suspension package for daily driving, towing, overland travel, and weekend trail use.

The front EXP dampers deliver premium large-body shock performance while reusing the truck’s original springs and related factory hardware. This approach provides meaningful gains in damping, durability, and ride-height adjustability while keeping the system practical and cost-conscious. Matching aluminum rear shocks complete the package with tuning developed specifically for the current-generation Tundra.

Performance Highlights

• Adjustable front ride height from approximately stock height to 2.25 inches of lift on compatible applications
• Fully serviceable and rebuildable 2.5-inch front dampers
• Retains the factory front coil springs and factory upper control arms
• Vehicle-specific front and rear tuning for balanced handling
• Improved body-motion control, impact management, and stability over uneven terrain
• Corrosion-resistant aluminum shock construction
• Front sway-bar correction hardware included for proper suspension geometry
• Compatible with up to 35 x 12.50-inch tires when paired with suitable wheels and any required trimming

Designed for Real-World Tundra Builds

This system is an excellent choice for owners who want a level stance and a noticeable improvement in suspension control without stepping into a complete remote-reservoir coilover package. The rebuildable front dampers provide a long-term performance platform, while the matching rear shocks help the truck remain composed through washboard roads, highway expansion joints, ruts, and changing cargo loads.

Wheel and Tire Guidance

• Factory wheels and tires are supported on compatible applications.
• A common aftermarket recommendation is a 17 x 8.5-inch wheel with approximately 5.75 inches of backspacing and a +25 mm offset.
• Up to 35 x 12.50-inch tires may fit with appropriate wheel selection; minor trimming or application-specific modifications may be required.
• Final clearance must be verified through the complete steering and suspension range.

Important Fitment Notes

• Not compatible with TRD Pro models.
• Not compatible with factory load-leveling rear air suspension.
• Not compatible with Adaptive Variable Suspension-equipped vehicles.
• Four-wheel-drive models without the TRD Off-Road package may require a differential-drop solution or compatible factory axle components.
• Automatic-leveling headlights may require an additional correction bracket.
• Vehicles equipped with the factory aluminum skid plate may require an additional spacer solution.
• Final lift height varies with trim, drivetrain, engine, factory suspension package, accessories, and installed vehicle weight.
• Advanced Driver Assistance Systems may require professional recalibration after installation.

Professional Installation Recommended

Installation should be completed by an experienced suspension professional. A complete alignment, driveline-angle inspection, fastener recheck, tire-clearance verification, and recalibration of affected driver-assistance systems should be performed before normal road use. Confirm compatibility against the truck’s exact trim, drivetrain, engine, rear suspension, and factory equipment before ordering.