KING 2.5 Premium Bolt-On Suspension System 

Upgrade your Tacoma with a premium suspension package built around KING 2.5 extended-travel remote reservoir shocks and Camburg KINETIK Series X-Joint XL billet upper control arms.

Designed for Tacoma owners who want a major step up from a conventional lift kit, this system delivers improved suspension control, increased off-road capability, better heat management, and premium component construction while maintaining a bolt-on configuration without the fabrication required by more extreme suspension systems.

Configure your system with your preferred Camburg UCA color, rear leaf-spring setup, and KING compression-adjuster option.

KING 2.5 Extended-Travel Front Coilovers

The front of the system features KING 2.5 extended-travel remote reservoir coilovers designed to provide increased suspension performance and additional usable travel when paired with the included Camburg upper control arms.

KING's large 2.5-inch shock bodies and remote reservoirs provide increased oil capacity to help control heat during demanding off-road driving.

The extended-travel configuration makes this package an excellent choice for Tacomas used for:

• Trail driving
• Desert terrain
• Overlanding
• Washboard roads
• High-speed off-road driving
• Daily driving with weekend off-road use

KING 2.5 Rear Remote Reservoir Shocks

A matching pair of KING 2.5 remote reservoir rear shocks completes the damping package.

The front and rear KING components are designed to provide a balanced suspension setup with improved control over rough terrain while maintaining predictable road manners.

Customers can configure the entire system with or without KING compression adjusters.

With or Without Compression Adjusters

This is one of the most important choices when configuring your suspension.

Without Compression Adjusters

The Without Adjusters configuration provides KING's premium 2.5 remote reservoir suspension with factory-set damping.

This is an excellent choice for customers who want high-performance KING suspension without needing to frequently change shock settings.

Choose Without Adjusters if you:

• Want a simpler setup
• Primarily drive the truck with a consistent configuration
• Don't expect major changes in payload
• Want KING performance without additional tuning controls
• Prefer to install the suspension and simply drive

You still receive the same premium KING 2.5 remote reservoir architecture and extended-travel front configuration.

With Compression Adjusters

The With Adjusters configuration adds external compression damping adjustment to the KING front and rear shocks.

This allows you to change how firmly the suspension responds to compression forces without replacing or revalving the shocks.

You can run a softer setting for comfort and slower terrain, then increase compression damping when additional control is desired.

The adjustable configuration is especially useful for Tacomas that experience changing conditions such as:

• Daily driving during the week and aggressive trails on weekends
• Changing cargo or overland equipment
• Towing
• High-speed desert driving
• Rough trails and whoops
• Long-distance overland trips
• Different terrain conditions

For customers looking for the most versatile version of this package, we recommend the With Adjusters configuration.

Camburg KINETIK Series X-Joint XL Upper Control Arms

Every configuration includes premium Camburg KINETIK Series X-Joint XL billet upper control arms.

These arms are designed to complement extended-travel suspension by providing increased articulation and suspension clearance while helping achieve proper alignment geometry on lifted Tacoma applications.

Their billet construction and heavy-duty joint design make them an excellent match for the KING 2.5 suspension.

Choose from:

Blue | Gray | Gold | Red

The color selection changes the finish of the upper control arms, allowing you to coordinate them with the rest of your build.

Choose Your Rear Suspension

Three rear configurations are available so you can match the suspension to the actual weight and equipment carried by your Tacoma.

No Leaf Springs

Choose this option if your Tacoma already has upgraded rear leaf springs, you plan to purchase a different leaf pack, or you simply don't need to replace the rear springs.

The KING rear shocks are still included.

OME Medium Load

The OME Medium Load package is designed for Tacomas carrying moderate additional weight.

This is an excellent choice for many daily-driven, trail, and moderately equipped overland Tacomas.

The complete rear package includes:

• Two OME Medium Load rear leaf springs
• Leaf-spring bushing kit
• Four new U-bolts
• Required component hardware

This configuration provides additional rear support without requiring the substantial constant weight intended for the Heavy Load springs.

OME Heavy Constant Load – 660 lb

The OME Heavy Constant Load package is designed specifically for Tacomas carrying approximately 660 lb of constant additional rear weight.

This may include permanently installed equipment such as:

• Campers
• Heavy bed racks
• Drawer systems
• Recovery equipment
• Tools
• Auxiliary fuel or water
• Overland equipment

The complete rear package includes:

• Two OME Heavy Constant Load rear leaf springs
• Leaf-spring bushing kit
• Four new U-bolts
• Required component hardware

Important: Heavy Constant Load springs are not simply a more aggressive version of the Medium Load springs. They are designed to support substantial permanent weight. An unloaded Tacoma may ride considerably firmer with a heavy constant-load spring.

What's Included

Depending on the configuration selected, your suspension package includes:

• Two KING 2.5 extended-travel front remote reservoir coilovers
• Two KING 2.5 rear remote reservoir shocks
• Two Camburg KINETIK Series X-Joint XL billet upper control arms
• Choice of Blue, Gray, Gold, or Red UCA finish
• Choice of KING suspension with or without compression adjusters
• Optional OME Medium Load rear leaf-spring package
• Optional OME Heavy Constant Load rear leaf-spring package
• Leaf-spring bushings and new U-bolts with OME configurations
• All hardware supplied with the components in your selected suspension package

Fitment

Toyota Tacoma 2005–2023 – 6-Lug Models

Vehicle configuration, wheel and tire combination, accessory weight, and other modifications can affect final suspension setup and clearance.

Professional suspension installation and a complete alignment after installation are strongly recommended.

Premium Performance Without the Fabrication

This package is designed for customers who want a serious KING suspension system while keeping the build considerably simpler than a fabricated race or long-travel suspension.

The combination of KING 2.5 extended-travel suspension, Camburg billet upper control arms, optional compression adjustment, and load-specific OME rear leaf springs creates a highly configurable suspension package suitable for everything from a premium daily-driven Tacoma to a heavily equipped trail or overland build.

For maximum versatility and the ability to fine-tune suspension behavior as driving conditions change, select With Compression Adjusters. For customers who prefer a simpler setup with KING's premium factory-tuned damping, select Without Compression Adjusters.